Woke Up To a Blue Screen

[Uncle Dong]

So to my surprise i woke up to see my pc has BSOD i dont know why but i do have the minidump now i just need someone who knows how to read it

https://www.mediafire.com/?00jczulszxzwey7

 

Can someone tell me what caused it? 

[AwesomeMcCoolName]

Upload the image to imgur or some other image sharing site if you actually want someone to help.

[Uncle Dong]

Upload the image to imgur or some other image sharing site if you actually want someone to help.

Its a minidump file

[AwesomeMcCoolName]

Its a minidump file

I'll still refer back to my previous comment. If you want help, then take a ss of the actual BSOD and upload it as something that doesn't need to be downloaded.

[Uncle Dong]

I'll still refer back to my previous comment. If you want help, then take a ss of the actual BSOD and upload it as something that doesn't need to be downloaded.

Really dude really you expect me to purposely BSOD and get the exact same error message?

[AwesomeMcCoolName]

Really dude really you expect me to purposely BSOD and get the exact same error message?

I guess that depends on if you want help or not.....

You shouldn't expect someone to download something from someone they don't know.

 

/You can just download the minidump file yourself and take some screenshots.

[KrystalGamer]

Download WhoCrashed. And analyze dump if it doesn't help this tutorial helped me in the past: 

[Free money accepted here]

I downloaded your .rar, because I'm a trusting person. From BlueScreenView: https://i.imgur.com/CSVEt77.png

 

I don't really know what it means, so I'm just putting a screenshot here for someone who doesn't want to download the rar.

[AwesomeMcCoolName]

From BlueScreenView: https://i.imgur.com/CSVEt77.png

Can someone tell me what caused it?

INPAGE_Errors are usually caused by bad sectors, failing memory module/s, or viruses.

 

I'd suggest starting off by booting up and running AVG/whatever anti-virus you have, and also running Malware Bytes. I would then back up any important data onto an external drive (just in case). If the issue still persists then I'd try to figure out what sequence of events causes your system to BSOD; and then trying to proc a crash while testing with different pieces of hardware connected.

 

You can also run a memory diagnostic tool Memtest86+ now (or if the issue persists) if you want to rule out the RAM.

Memtest86+ download: http://www.memtest86.com/download.htm

Creating a Memtest86+ bootable USB: http://www.memtest86.com/technical.htm#win

[Uncle Dong]

INPAGE_Errors are usually caused by bad sectors, failing memory module/s, or viruses.

 

I'd suggest starting off by booting up and running AVG/whatever anti-virus you have, and also running Malware Bytes. I would then back up any important data onto an external drive (just in case). If the issue still persists then I'd try to figure out what sequence of events causes your system to BSOD; and then trying to proc a crash while testing with different pieces of hardware connected.

 

You can also run a memory diagnostic tool Memtest86+ now (or if the issue persists) if you want to rule out the RAM.

Memtest86+ download: http://www.memtest86.com/download.htm

Creating a Memtest86+ bootable USB: http://www.memtest86.com/technical.htm#win

Well if thats the case then it was my dying HDD that caused it

I plan on upgrading for christmas and im getting a 1TB HDD so thats good

[Status Update Nazi]

Well i think what you need is a good source of RAM. Seeing as your "Bug Check String" Says "KERNAL_DATA_INPAGE_ERROR" this obviously means your computers kernels have popped D: Now as i stated earlier, this is more than likely because of RAM ^^ (your kernels are placed next to the RAM) Now i have a method for you:

 

METHOD 1

1) Download more RAM here: http://www.downloadmoreram.com/download.html [its "http://www.downloadmoreram.com/download.html"] [lmk if its tou :/]

2) Remove your kernels *

3) Buy more kernels here: http://www.snappypopcorn.com/productcart/pc/Snappy-4-Pounder-Yellow-50p842.htm [My Favorite, Provides enough kernals for over 9000 BSOD's]

4) Sprinkle a generous amount over the MB (The more the merrier!)

5) Turn the Computer off and on again

 

* to remove your kernels take your case off of your pc. Then take out your motherboard and a hammer, lightly tap the motherboard until it looks like this : http://gyazo.com/e458f54abb163fc7e8fe6a2958a3158d

 

METHOD/REASON 2

Your computer is getting to hot and that is an overall result of the popage so...

1) Get a gallon jug of water

2) Lay pc down and take side-cover off

3) KEEP IT PLUGGED IN FOR BEST RESULTS

4) Slowly empty the jug on to the motherboard and RAM

5) Sparks are good the more the better

6) After the jug is empty then put the pc on a towel to dry

 

Btw this is a complete joke and should nowhere close be taken seriously 

[Uncle Dong]

Well i think what you need is a good source of RAM. Seeing as your "Bug Check String" Says "KERNAL_DATA_INPAGE_ERROR" this obviously means your computers kernels have popped D: Now as i stated earlier, this is more than likely because of RAM ^^ (your kernels are placed next to the RAM) Now i have a method for you:

 

METHOD 1

1) Download more RAM here: http://www.downloadmoreram.com/download.html [its "http://www.downloadmoreram.com/download.html"] [lmk if its tou :/]

2) Remove your kernels *

3) Buy more kernels here: http://www.snappypopcorn.com/productcart/pc/Snappy-4-Pounder-Yellow-50p842.htm [My Favorite, Provides enough kernals for over 9000 BSOD's]

4) Sprinkle a generous amount over the MB (The more the merrier!)

5) Turn the Computer off and on again

 

* to remove your kernels take your case off of your pc. Then take out your motherboard and a hammer, lightly tap the motherboard until it looks like this : http://gyazo.com/e458f54abb163fc7e8fe6a2958a3158d

 

METHOD/REASON 2

Your computer is getting to hot and that is an overall result of the popage so...

1) Get a gallon jug of water

2) Lay pc down and take side-cover off

3) KEEP IT PLUGGED IN FOR BEST RESULTS

4) Slowly empty the jug on to the motherboard and RAM

5) Sparks are good the more the better

6) After the jug is empty then put the pc on a towel to dry

 

Btw this is a complete joke and should nowhere close be taken seriously 

Oh umm that last part.....yeah

[knavesmith]

Well i think what you need is a good source of RAM. Seeing as your "Bug Check String" Says "KERNAL_DATA_INPAGE_ERROR" this obviously means your computers kernels have popped D: Now as i stated earlier, this is more than likely because of RAM ^^ (your kernels are placed next to the RAM) Now i have a method for you:

 

METHOD 1

1) Download more RAM here: http://www.downloadmoreram.com/download.html [its "http://www.downloadmoreram.com/download.html] [lmk if its tou :/]

2) Remove your kernels *

3) Buy more kernels here: http://www.snappypopcorn.com/productcart/pc/Snappy-4-Pounder-Yellow-50p842.htm [My Favorite, Provides enough kernals for over 9000 BSOD's]

4) Sprinkle a generous amount over the MB (The more the merrier!)

5) Turn the Computer off and on again

 

* to remove your kernels take your case off of your pc. Then take out your motherboard and a hammer, lightly tap the motherboard until it looks like this : http://gyazo.com/e458f54abb163fc7e8fe6a2958a3158d

 

METHOD/REASON 2

Your computer is getting to hot and that is an overall result of the popage so...

1) Get a gallon jug of water

2) Lay pc down and take side-cover off

3) KEEP IT PLUGGED IN FOR BEST RESULTS

4) Slowly empty the jug on to the motherboard and RAM

5) Sparks are good the more the better

6) After the jug is empty then put the pc on a towel to dry

 

Btw this is a complete joke and should nowhere close be taken seriously 

At least you acknowledged it was a joke.